[. . . ] [. . . ] With Tecom's MT-9960, it will automatically route phone calls between GSM and PSTN interfaces based on Mobile Trunk's internal Least Cost Routing ( LCR ) function setting, and no re-programming/ modification to existing customer PBX system. Provide Selectable Dual-band 900/1800MHz (850/1900) and PSTN Service RJ11x2, RS232 for plug-and-play installation Power-failure transfer Battery back-up interface Provides LCR (Least Cost Routing) function Provides any Carrier-specified dialing Prefix Routing Carrier-personalization Built-in voice path selector, no dedicated CO-Line port required. . Fast Dialing Call waiting tone between mobile and CO calls DTMF and FSK Caller ID repeater Polarity Reversal and Metering Pulse for billing Default profiles for LCR table and dialing prefix Call data set-up via regular telephone or PC Remote programmable call data set-up and maintenance Interface: RJ-11 for Line interface RJ-11 for Phone / PBX interface RS-232 for data interface (option) Operatingfrequency 900/1800MHz or 850/1900MHz Antenna impedance 50ohm SMA Female Status LED: Power Mobile Link Status Mobile call status CO call status Dimension: 115 mm (W) x 163 mm (L) x 40 mm (H) Weight : 600 g Power Requirement: Jack for 110VAC /220VAC to 9 VDC transformer DC input : 7. 5V/1A RF Power : 2W (900MHz) and 1W (1800 MHz) TECOM CO. , LTD. 23 R&D Road 2, Science-Based IndustrialPark Hsin-Chu, Taiwan, R. O. C. Tel: 886-3-5775141 Fax :886-3-5776855 E-mail: digisonic@tecom. com. tw Site : http:// www. tecom. com. tw www. tecomproduct. com Y IT ASSURED IT © 2005 TECOM CO. , LTD. TECOM reserves the right to make changes to product specifications without notices. Y FIR ASSURED GREEN DO VE AW ARD FIR OUA OUA I SO M M 14001 S GS S GS S GS [. . . ] [. . . ]